The entire course is split into 3 modules
Module 01
1.1 Overview of Process Plants
1.2 Overview of Different CODES STANDARDS
1.3 Roles Responsibilities of Piping Engineer
1.3.1 Piping Layouts
1.3.2 Piping Materials Engineer
1.3.3 Pipe Stress Analysis (Flexibility Analysis)
1.4 Piping Elements
1.4.1 Pipes (EFW, Seamless, ERW manufacturing process)
1.4.2 Pipe Fittings
1.4.3 Flanges
1.4.4 Swage Nipple, Reducers Nipples
1.5 Preparation of Tee Branch Table
1.6 Thumb Rule calculations used in Industry
1.7 Introduction to Process Equipment used in industry.
1.7.1 Static Equipment
1.7.1.1 Pressure Vessels (ASME Section VIII Div.1 and 2)
1.7.1.2 Reactors
1.7.1.3 Heat Exchanges
1.7.1.4 Scrubbers
1.7.1.5 Pig Launchers and Receivers
1.7.1.6 Slug Catchers
1.7.1.7 Distillation Columns
1.7.2 Rotary Equipment
1.7.2.1 Pump
1.7.2.2 Compressors
1.7.2.3 Turbines
1.7.3 Packaged Units
Module 02
2.1 Multi-Discipline Project Setup
2.2 Reading Understanding Other Discipline Drawings and Documents.
2.2.1 PFD – Process Flow Diagram
2.2.2 PID – Process Instrumentation Diagram
2.2.3 Instrumentation Hook-Up Drawings
2.2.4 Mechanical General Arrangement Drawings (Mechanical GAD)
2.2.5 Structural and Civil Layout Drawings
2.3 Understanding the Basic Concepts of Engineering Drawings
2.4 Understanding Preparation of Piping Drawings
2.4.1 Plot Plan Development
2.4.2 Equipment Layout Drawing
2.4.3 Piping Layout Drawing
2.4.4 Piping Isometric Drawings
2.4.5 Nozzle Orientation Drawing
2.4.6 Pipe Support Layout
Module 03
3.1 Pipe Supports
3.2 Piping Materials Engineering
3.3 Pipe Stress Analysis
3.4 Pump Suction and Discharge Piping Layout Design
3.5 Pipe Rack Design
3.6 Tank Farm Design [OISD – STD – 118]