All right. In this lecture, I will show you how we can make the notes for this character. As you can see, on the illustration, we don't really have a nose. But I think in 3d it is really important to our corrector have a nose. So, we will make that first we will use a 3d cylinder. So with the insert, we will insert the new 3d cylinder, change the color to this brown.
And with initialize, we make a cue cylinder. Alright, we place it in if you hover over your 3d mesh, the base of the head You can pick the color of that for the nose. And we noticed that the eyeglasses didn't get the black color permanently. So now we feel these objects with the black color. And now we can change to the other. Alright, we place the cylinder here.
All right. Now scale it up on the y axis we add some subdivisions to that nose part. We want to deform it as we did on the middle part of the glass. But we need to deal with lower sub days to make the formations. And with the band arc modifier, we can band The nose to get this shape. Click on accept.
And now we can rotate it and hide the top bar. into the head. Alright, scale it up a little bit. Moscow the top part and if you hold down the Ctrl and tap on the mask area, you can soft the mask a little bit and it will be not too hard. Okay, now with the move brush, I turn on the transparency on the right side to see what I'm doing with the top part. masking out the top part image Started in now with the move to I can move with into the head and it is now not visible.
Now we want to adjust with the move brush the bottom part to make it an actual nose shape. okay of course we want to do that with symmetries on. So I undo any deformation I did and I start adjusting weed symmetry is active Now with symmetry I can make the nose more wider and I playing with the shape until I don't like it. All right. Take your time to editing the shape with the move rash. And with the smooth brush, you can make it a little bit softer but don't use it too strongly.
All right. I think the nose is almost done. Now I give it subdivision to make it more smoother and with that, I can check out more actual shape Kelly down a little bit and don't forget to save the project really often and I suggest you to save your project in different versions. So don't overwrite everything for one project version because if you want to go back sometimes or you did a big mistake, what you can't undo, you can go back easily. All right. Now we can say that the nose is done.
So in the next section, I will show you how we can make eyebrows to our character.