Let us bring the last portion, insert into current design the train seven path. So here I have this part, I'm clicking cancel, and I'm closing the data panel. Now I have one of the spots in this portion and again the other part connecting these two wheels. So first, let me assemble it with these two things. So I'm going for G capture position, selecting this and so here if you can see, there's going to touch that portion. So going inside, so I'll just say flip direction, and I'm allowing this that access revolution Then for the second portion again I have to assemble it with this we'll also so I'm selecting this portion and this assembly.

So I'm clicking OK. And you can see these two wheels the position here is automatically aligned because that is the only possible position now when I'm rotating you can see both the wheels will be rotated by applying the same constraints I have put the strain seven pack in correct position in infant these two meals. So here if you see these two rods have to move in tandem with each other. That is they cannot move independently but they have to move together. So, I need to give one more joint option. So here I'm going to select G and capture position. And if you see this plane that has selected and this plane should be in the same plane or parallel to this.

So I'm selecting this point. You can see here now one is lying on the other. Now I'm going from flip, flip direction. Now, again, I can see okay, here I can go to right click and edit joint instead of rigid, I can do planar and then click OK. So now what these options, you can see if I'm moving one, the other also will be moved. So I'm here keeping it at the bottom.

You can rotate and see here at the bottom you have the same moment so on small things that you see here are of course the constraints that you have given. So I can, if you have seen all our joints appear below so I can right click and edit any join that they need.