Okay guys, with the ronin app installed on your phone, you want to make sure that you've turned on the ronin on the base, so just press the button once you should see a green light and at the top, press down once you should hear the sound. Now you can connect through Bluetooth by clicking on the Connect to Ronan button. And after you've done that, we can go over to configuration setting and click balance tests. But it's let the ronin do its thing. And then ideally you're going to want to see excellence across the pitch, yaw and roll. If not, go ahead and turn Off the Ronen and then make some micro adjustments, try again, make sure you're doing this on a solid surface and make sure everything was perfectly bounce.

So I'm lucky here I've got your roll and pitch. Excellent. So the next thing we need to do is go over to back out of there, go to motor parameter, and then you can select Auto Tune. So it's gonna take a minute or two so just don't touch the run and while it's doing this, you're gonna hear some noises 40% Okay, I got calibration success. Okay, this is also a good opportunity to go over some of the basic things trawls under autotune or beside auto tune, I can see that I've got a medium profile. So this is not too fast, not too slow.

There's another setting for low. So what these are our presets, so if it's low, it's going to be a lot slower to do things like pan, which is sometimes what you want when you don't want to overly fast pan. So if I go too high on the app, you can see that it's a little bit faster but more aggressive. So I'm going to go ahead and just change it over to medium. And you can change these things automatically if you just tap on them. So these are just presets.

There's also Advanced Settings. I don't touch those. Okay, so now that we have our own balance and Motor auto tunes. Let's go over some of the basic controls for the ronin