Hello, it's Rob here from Rob coven calm. So we're nearly finished. Now I'm just going to show you a few more tricks that we can do with these shape layers. If you wanted to make the area's pop out even more, of course, this upper lip and lower lip, they're both set to overlay at 50%. With the Move Tool selected, and the layer selected, we can hit zero on the keypad, and that puts the opacity up to 100. We'll do the same on the upper lip, that's at 50.

At the moment, we'll hit zero, it's 100 and the lips are going even more red. If we wanted to accent the lips even further. We could do Command or Control j on both of the layers and as you can see, they go even more red We could cut that down and put somewhere in between the two. By putting the top layer at 50%, I'm going to hit five on the keyboard for the top copies. So this is on the lower lip coffee, I'll put five. And now on the upper lip coffee, I'll go five again.

So we've got somewhere in between there. Some people will say I've gone too far on that, but it's obviously up to your own personal requirements. So I'm on that I know we're on overlay on the eye, and it's 50% I'm going to hit zero again, and that I really pops out and the other one, we can go shift plus or minus on the right eye, and you'll find some even more interesting effects that's with color layer blend mode. vivid lights is interesting as well, but I think I'm gonna stick with overlay. Again, we could double up this effect by going Command or Control j on the right Command or Control j on the left, but I think that's too much really. So now we've finished, I'm going to show you the difference we've made.

So we'll put the original layer right up to the top so we can see it. So there's the original, and there's our stylized version of our models face. Well, I hope you enjoyed this series of videos showing you how to make some initial corrections, smoothing out the skin with a filter and layer blend modes, and finally, enhancing certain colors and areas of the image using shape layers, as well as layer blend modes and capacities. Okay, hope you enjoyed all that. My name is Rob, Rob coven.com. Goodbye.