This course will teach you how to use a Web Page to Control anything using Arduino, This Guide will take you in a step by step manner to know what each component inside this circuit is, and what it does and how to wire it up, starting with the Ethernet shield and ending with resistors.
Welcome to this course
You will know what is the actual working principle of ethernet shield and how to interface and configure it correctly so that you can access your Arduino Powered device from anywhere with an internet connection, and control any device with simple clicks in a webpage.
After this course, you will be able to make your own web controlled device and the choice is yours to use it in any application that comes in your mind and can make your life easier since all connections are explained in detail.
We are going to control LEDs from a web page using an Arduino Ethernet module. The ethernet module will create a server using the router and we will set a web page for this server.
We will use the HTML commands to print the data and to make the buttons on the web page. When the button on the web page is pressed, we will get some data on the serial monitor. We will save this data in the string and will use this data to turn the LEDs on or off.
A goal from Arduino web control course:
Connect Arduino ethernet shield to the Arduino board with all necessary components and make it the internet-based.
What will you learn in this course?
Who should take this course?